Indramat KDA 3.2-100-3-A00-W1 - N * NCMD (spindle won't turn

cnc-club.ru for English speaking users

Indramat KDA 3.2-100-3-A00-W1 - N * NCMD (spindle won't turn

Сообщение Maws » 14 янв 2020, 11:28

Anyone got any idea what might cause N * NCMD on this controller.....

And is there anything I can measure to check that it get's the signals it's supposed to ? (it got the DC rail OK, but won't output any voltage to the motor).

Indramat KDA 3.2-100-3-A00-W1 - N * NCMD (spindle won't turn 20191109_160137_1.jpg


found some info but not sure if it helps.

Indramat KDA 3.2-100-3-A00-W1 - N * NCMD (spindle won't turn Screenshot from 2019-11-10 18-52-39.png

Indramat KDA 3.2-100-3-A00-W1 - N * NCMD (spindle won't turn Screenshot from 2019-11-10 18-56-38.png




I suspect it might be something wrong with the spindle drive, but it does show the green "ready" light, so before pulling it out it would be nice to have checked out what could be checked....
Maws
Новичок
 
Сообщения: 1
Зарегистрирован: 14 янв 2020, 11:14
Репутация: 0
Настоящее имя: Stian

Вернуться в English forum

Кто сейчас на конференции

Зарегистрированные пользователи: Adskiydart, and.ksp, Argon-11, asher, Belorez, Bing [Bot], BOdrOFF, Саурон, drykov, Enot_1, Google [Bot], john1987887, kts, Majestic-12 [Bot], nik0, pegas13, Portos, savo, sima8520, StavRos, Woodmaster, Yandex [bot], yurayerz

Reputation System ©'